Techart

Les protos et les nouveaux millésimes
Répondre
Avatar du membre
Olivier44
Messages : 16712
Enregistré le : lun. 21 juil. 2008 12:42
Localisation : Saint-Herblain
Contact :

Techart

Message par Olivier44 »

Techart designs and makes their own fin line following a single philosophy: To unite artisanship with the most advanced technologies. The result is a product in limited edition built without compromises using the best carbon fibers available. Each one personalized according to the demands of the client : http://www.techart.it/

La gamme Techart Slalom / Speed : http://www.techart.it/page12/page16/


RSL03 : Slalom - Medium - Light Wind, 42-44-46-48-50-52-54-56-58-60 cm

The RSL03 is for use in Medium to light winds. This model is wider in the tip than the RSL.06 with a rake angle of 9 degrees giving it a slightly quicker planing ability. Designed for modern slalom boards over 120 litres.

Image


RSL04 : Slalom Medium - High wind, 32-34-36-38-40-42-44-46-48-50 cm

This is a medium to high wind Slalom fin designed to go with modern slalom boards around 100 litres. It has a wide base and tip when compared to the RSL05. Rake angle of 12 degrees for more control at speed.

Image


RSL05 : Slalom Medium - High Wind, 32-34-36-38-40-42-44-46-48-50 cm

This Slalom fin is designed for Medium to high winds, this has a narrower tip compared to the RSL.05 giving it more twist in the tip and control in the gusts. Designed for slalom boards around 100 litres. Rake angle of 12 degrees for controll at high speed.

Image


RSL06 : Slalom - Medium - Light Wind, 42-44-46-48-50-52-54-56-58-60 cm

The RSL06 has a narrower tip compared to it counterpart the RSL03. with the same 9 degree rake this fin has different flex characteristics and can handle gusty conditions better. Designed for modern slalom boards over 120 litres.

Image


SD02 : Slalom Speed - High Wind, 28-30-32-34-36-38-40 cm

A real Down wind blaster with a racked back more eliptical outline and thiner chord. The SD02 is very fast and controllable. Rake angle of 13 Degrees

Image


RSP03 : Speed, 18-20-22-24-26-28 cm

The RSP03 has been designed for off the wind speed runs. low in aspect and narrow in the chord, this fin is a fast performer. As with all the other models this is produced using a carbon lay up and moulded for precision, this fin is a quality unit.

Image
Avatar du membre
peppone
Messages : 18
Enregistré le : mar. 2 mars 2010 18:18
Contact :

Re: Techart

Message par peppone »

Cela doit faire au moins 6 ou 7 ans qu'ils existent avec les mêmes ailerons.
Un pote en avait acheté un en 2007 sauf erreur, il marchait vraiment bien.
A l’époque il avait payé ça 200€ mais maintenant je n'ai aucune idée.

Les prix de l'importateur au japon sont très élevés, 350€ mini, mais c'est sûrement moins cher ici:

http://www.windsurfing-japan.com/wind/techart_fin.html
Avatar du membre
Olivier44
Messages : 16712
Enregistré le : lun. 21 juil. 2008 12:42
Localisation : Saint-Herblain
Contact :

Re: Techart

Message par Olivier44 »

Les prix sur windsurfingfins.co.uk :arrow: http://www.windsurfingfins.co.uk/prod1.asp?ID=386

RSL03 210 €, RSL04 192 €, RSL05 192 €, RSL06 210 €, SD02 168 €, RSP03 168 €
Avatar du membre
Olivier44
Messages : 16712
Enregistré le : lun. 21 juil. 2008 12:42
Localisation : Saint-Herblain
Contact :

Re: Techart

Message par Olivier44 »

RSL07 : Slalom - Sizes 32 - 50 cm Deep Tuttle - Tuttle - Powerbox

Following the latest trends in shape, with curved leading edge together with wider tip and base dimenions. Best suited to the latest breed of slalom boards. The RSL07 is both fast off the wind and more controllable in the gybe thanks to the new outline. Hand made Custom carbon construction.

€ 204.00 : http://www.windsurfingfins.co.uk/prod5. ... rod_anchor

Image
ahd-surfer
Messages : 7
Enregistré le : mer. 1 janv. 2014 12:01
Contact :

Re: Techart

Message par ahd-surfer »

Personnellement, si à première vue semblent être des copies d'ailerons Select, différents millésimes.

Le RSL03 cela ressemble à un Select Superfast 06 , RSL04 à un Select S10 ou S11, RSL05 à un Select SL7, RSL06 à un Select S12, SD02 à un Select Caspar Speed, RSL07 à un Select V-max.

Bizarre, mais comme je l'ai dit, ressemble à, cela ne signifie pas que les copies sont.
Répondre