Ezzy 2013

[yves-deps]

Catalogue Ezzy 2013

là il y a matière à cogiter €€€€ http://www.gunsails.de/fr/pro.php?p=2912

Une légacy au poids top!!en plus . http://www.ezzy.com/sails/2013-sails/2013-ezzy-legacy/

Review Ezzy Legacy 2013 http://www.boardkings.com/2013/05/revie ... gacy-2013/

[chessou]

Les points sur lesquels Ezzy a économisé :

- The boom height indicators are missing
- The mast protector doesn’t come standard and there is a ring instead of a pulley. This is to reduce cost and keep the price low. You can buy these separately.
- The lowest part of the sail is the same X-ply as the whole sail instead of x-ply with a closer thread woven in between the layers of x-ply
- The Lowest part of the sail has a slightly thinner plastic reinforcement
- Also the material of the mast-sleeve is a bit thinner compared to the 2008 Wave Se and the Tigers.
- The batten pockets don’t have additional reinforcement on the outside which exposes the x-ply
- The battens are made of a different material which is slightly heavier but just as strong as the other battens.

Seuls point gênants tout de même, pas de poulie seulement un anneau et pas de protection de mât, il faut acheter ces accessoires en plus...

[yves-deps]

Les points sur lesquels Ezzy à économisé:

- The boom height indicators are missing
- The mast protector doesn’t come standard and there is a ring instead of a pulley. This is to reduce cost and keep the price low. You can buy these separately.
- The lowest part of the sail is the same X-ply as the whole sail instead of x-ply with a closer thread woven in between the layers of x-ply
- The Lowest part of the sail has a slightly thinner plastic reinforcement
- Also the material of the mast-sleeve is a bit thinner compared to the 2008 Wave Se and the Tigers.
- The batten pockets don’t have additional reinforcement on the outside which exposes the x-ply
- The battens are made of a different material which is slightly heavier but just as strong as the other battens.

Seuls point gênants tout de même, pas de poulie seulement un anneau et pas de protection de mât, il faut acheter ces accessoires en plus...

Une protec de pdm "scratchable" suffit, et 3 poulies au pire c'est pas la ruine.
Frottements de fourreau de lattes au sol ou trucs dans le genre ça va trinquer, mais en nav et brassage vague construction toujours sérieuse semble t'il.
Lattes un poil plus lourdes mais les poids des voiles sont bien placés.

Reste aussi le problème de la distrib via l’Angleterre !,apparemment...

Distributeur de France
Seasprite Ltd
Contact: Ben Legoupil
Unité 9 Brookside Business Park
Avenue Brookside
Rustington BN16 3LP, Royaume-Uni
Tél: 00 33 (0) 615 835 552
E-mail: ben@seaspritesports.com
Site Web: http://www.seaspritesports.

çi c'est le cas les shops en france ne vont pas bondir au plafond pour des commandes margés à peau de chagrin, à part les irréductibles souvent loin de chez soi...