Techart
Posté : mer. 27 juin 2012 10:40
Techart designs and makes their own fin line following a single philosophy: To unite artisanship with the most advanced technologies. The result is a product in limited edition built without compromises using the best carbon fibers available. Each one personalized according to the demands of the client : http://www.techart.it/
La gamme Techart Slalom / Speed : http://www.techart.it/page12/page16/
RSL03 : Slalom - Medium - Light Wind, 42-44-46-48-50-52-54-56-58-60 cm
The RSL03 is for use in Medium to light winds. This model is wider in the tip than the RSL.06 with a rake angle of 9 degrees giving it a slightly quicker planing ability. Designed for modern slalom boards over 120 litres.
RSL04 : Slalom Medium - High wind, 32-34-36-38-40-42-44-46-48-50 cm
This is a medium to high wind Slalom fin designed to go with modern slalom boards around 100 litres. It has a wide base and tip when compared to the RSL05. Rake angle of 12 degrees for more control at speed.
RSL05 : Slalom Medium - High Wind, 32-34-36-38-40-42-44-46-48-50 cm
This Slalom fin is designed for Medium to high winds, this has a narrower tip compared to the RSL.05 giving it more twist in the tip and control in the gusts. Designed for slalom boards around 100 litres. Rake angle of 12 degrees for controll at high speed.
RSL06 : Slalom - Medium - Light Wind, 42-44-46-48-50-52-54-56-58-60 cm
The RSL06 has a narrower tip compared to it counterpart the RSL03. with the same 9 degree rake this fin has different flex characteristics and can handle gusty conditions better. Designed for modern slalom boards over 120 litres.
SD02 : Slalom Speed - High Wind, 28-30-32-34-36-38-40 cm
A real Down wind blaster with a racked back more eliptical outline and thiner chord. The SD02 is very fast and controllable. Rake angle of 13 Degrees
RSP03 : Speed, 18-20-22-24-26-28 cm
The RSP03 has been designed for off the wind speed runs. low in aspect and narrow in the chord, this fin is a fast performer. As with all the other models this is produced using a carbon lay up and moulded for precision, this fin is a quality unit.
La gamme Techart Slalom / Speed : http://www.techart.it/page12/page16/
RSL03 : Slalom - Medium - Light Wind, 42-44-46-48-50-52-54-56-58-60 cm
The RSL03 is for use in Medium to light winds. This model is wider in the tip than the RSL.06 with a rake angle of 9 degrees giving it a slightly quicker planing ability. Designed for modern slalom boards over 120 litres.
RSL04 : Slalom Medium - High wind, 32-34-36-38-40-42-44-46-48-50 cm
This is a medium to high wind Slalom fin designed to go with modern slalom boards around 100 litres. It has a wide base and tip when compared to the RSL05. Rake angle of 12 degrees for more control at speed.
RSL05 : Slalom Medium - High Wind, 32-34-36-38-40-42-44-46-48-50 cm
This Slalom fin is designed for Medium to high winds, this has a narrower tip compared to the RSL.05 giving it more twist in the tip and control in the gusts. Designed for slalom boards around 100 litres. Rake angle of 12 degrees for controll at high speed.
RSL06 : Slalom - Medium - Light Wind, 42-44-46-48-50-52-54-56-58-60 cm
The RSL06 has a narrower tip compared to it counterpart the RSL03. with the same 9 degree rake this fin has different flex characteristics and can handle gusty conditions better. Designed for modern slalom boards over 120 litres.
SD02 : Slalom Speed - High Wind, 28-30-32-34-36-38-40 cm
A real Down wind blaster with a racked back more eliptical outline and thiner chord. The SD02 is very fast and controllable. Rake angle of 13 Degrees
RSP03 : Speed, 18-20-22-24-26-28 cm
The RSP03 has been designed for off the wind speed runs. low in aspect and narrow in the chord, this fin is a fast performer. As with all the other models this is produced using a carbon lay up and moulded for precision, this fin is a quality unit.
